To Next PageTo Next Page
Need help?Do you have a question about the ABB ProcessMaster FEP631 and is the answer not in the manual?
General| Measurement Principle | Electromagnetic |
|---|---|
| Lining material | PTFE, PFA, or rubber |
| Electrode material | Stainless steel, Hastelloy, tantalum |
| Fluid temperature | -40°C to +180°C (depending on lining material) |
| Pressure Rating | PN10 to PN40 (depending on size) |
| Output Signal | 4 to 20 mA, HART, FOUNDATION Fieldbus, PROFIBUS PA |
| Enclosure Rating | IP67 |
| Operating Temperature | -40°C to +60°C |
| Material | Stainless steel |
Notes on Ex safety instructions and relevant icons.
Explains the electromagnetic flowmeter's working principle based on Faraday's law.
Safety warnings for process conditions, live parts, and Ex atmospheres.
Step-by-step guide for installing the sensor and transmitter.
Procedures for safely opening and closing the device housing.
Safety warnings for electrical connections and sensor grounding methods.
Grounding procedures for various pipe types and configurations.
Power supply connection requirements and pin assignments.
Detailed pin assignments and wiring for inputs and outputs.
Notes on protocol security and specifications for HART and Modbus.
Notes on PROFIBUS DP protocol security and interface specifications.
Essential checks before initiating device commissioning.
Methods for configuring device parameters via local interface or HART.
Step-by-step guide for configuring common parameters via Easy Setup.
Safety warnings and how to navigate the LCD menu.
