94 FEP630, FEH630 ELECTROMAGNETIC FLOWMETER | OI/FEP630/FEH630-EN REV. D
… 8 Operation
… Parameter descriptions
Menu: Process Alarm
Menu / parameter Description
Process Alarm
Alarm history Display of the alarm history
Clear Alarm History Reset of the alarm history.
...Group Masking Selection of submenu ‘...Group Masking’ using .
...Alarm Limits Selection of submenu ‘...Alarm Limits’ using .
Process Alarm / ...Group Masking
Maintenance Required Alarm messages are divided into groups.
If masking is activated for a group (On), no alarm is issued.
For additional information, see Diagnosis / error messages on page 109.
Function Check
Out Of Specification
Process Alarm / ...Alarm Limits
Qm Massflow Min Set the minimum / maximum limit value (0 to 110 %) for mass measurement. If the process value ‘Qm [unit]’ exceeds or falls
below the limit value, an alarm is triggered.
Qm Massflow Max
Qv Volumeflow Min Set the minimum / maximum limit value (0 to 110 %) for volume measurement. If the process value ‘Qv [unit]’ exceeds or
falls below the limit value, an alarm is triggered.
Qv Volumeflow Max
To Next Page
Loading...
