ABB 10DX3111 - Page 70

TABLE 6-4. GROUNDING RINGS - SIZES 1/2 THROUGH 4 INCHES
Order number consists of two grounding rings and mounting screws.
When ordering, add suffix to the BM number.
Meter Size Material =
Flange Rating
ANSI Class 150
Flange Rating
ANSI Class 300
316 sst HAST "C" 316 sst
Inches mm BM No. Suffix BM No. Suffix
1
⁄
2
15 800D508 U01 U09 800D708 U02
1 25 800D508 U02 U10 800D708 U03
1
1
⁄
2
40 800D508 U03 U11 ---------- ---
2 50 800D508 U04 U12 800D708 U04
3 80 800D508 U05 U13 800D708 U05
4 100 800D508 U06 U14 800D708 U06
TABLE 6-5. GROUNDING RINGS - SIZES 6 THROUGH 12 INCHES
NOTE
Polyurethane, neoprene & hard-rubber lined meters use neoprene
gaskets. TEFLON & TEFZEL lined meters use TEFLON gaskets.
Order number consists of one grounding ring and mounting screws. Order a quantity of two for each
meter. Order by the referenced part number.
Meter size
Flange Rating
ANSI Class 150
Flange Rating
ANSI Class 300
304 sst with
neoprene gasket
304 sst with
neoprene gasket
Inches mm Part Number Part Number
6 150 644B009U01 644B009U23
8 200 644B009U03 644B009U25
10 250 644B009U69 644B009U71
12 300 644B009U70 644B009U72
Meter size
Flange Rating
ANSI Class 150
Flange Rating
ANSI Class 300
304 sst with
TEFLON gasket
304 sst with
TEFLON gasket
Inches mm Part Number Part Number
6 150 644B009U02 644B009U24
8 200 644B009U04 644B009U26
10 250 644B021U19 644B021U21
12 300 644B021U20 644B021U22
Series 10DX3000 Magnetic Flowmeter Instruction Manual
6-3