ABB 630 series - Page 31

Function name Signal type Signal name Description
DSTPDIS.1.3 FLTLOOP_RPP
Z2
Record data of bank 3 for PP-
loop resistance, Zone Z2
DSTPDIS.1.3 FLTLOOP_RPP
Z3
Record data of bank 3 for PP-
loop resistance, Zone Z3
DSTPDIS.1.1 DIRECTION Record data of bank 1 for
direction
DSTPDIS.1.2 DIRECTION Record data of bank 2 for
direction
DSTPDIS.1.3 DIRECTION Record data of bank 3 for
direction
DSTPDIS.1.1 DIR_E_FLT GFC Record data of bank 1 for EF-
direction, GFC
DSTPDIS.1.2 DIR_E_FLT GFC Record data of bank 2 for EF-
direction, GFC
DSTPDIS.1.3 DIR_E_FLT GFC Record data of bank 3 for EF-
direction, GFC
DSTPDIS.1.1 RELEASE_PE
GFC
Record data of bank 1 for
release PE-loops, GFC
DSTPDIS.1.2 RELEASE_PE
GFC
Record data of bank 2 for
release PE-loops, GFC
DSTPDIS.1.3 RELEASE_PE
GFC
Record data of bank 3 for
release PE-loops, GFC
DSTPDIS.1.1 RELEASE_PP
GFC
Record data of bank 1 for
release PP-loops, GFC
DSTPDIS.1.2 RELEASE_PP
GFC
Record data of bank 2 for
release PP-loops, GFC
DSTPDIS.1.3 RELEASE_PP
GFC
Record data of bank 3 for
release PP-loops, GFC
DSTPDIS.1.1 Zones OPERATE Record data of bank 1 for
operate signals of all zones
DSTPDIS.1.2 Zones OPERATE Record data of bank 2 for
operate signals of all zones
DSTPDIS.1.3 Zones OPERATE Record data of bank 3 for
operate signals of all zones
Binary inputs DSTPDIS.1.OPERATE_GFC Time delayed operate-signal,
GFC
DSTPDIS.1.START_GFC General start-signal, GFC –
DSTPDIS.1.ST_GFC_A Event start phase A, GFC
DSTPDIS.1.ST_GFC_B Event start phase B, GFC
DSTPDIS.1.ST_GFC_C Event start phase C, GFC
DSTPDIS.1.RELEASE_A Event release phase A to earth
fault
DSTPDIS.1.RELEASE_B Event release phase B to earth
fault
DSTPDIS.1.RELEASE_C Event release phase C to earth
fault
DSTPDIS.1.RELEASE_AB Event release phase A to phase
B
Table continues on next page
1MRS756791 A Section 2
DNP3 data mappings
630 series 25
Point List Manual