Need help?Do you have a question about the ABB REM 610 and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Display | LCD |
| Voltage Rating | 100-250 V AC/DC |
| Voltage Range | 100-250 V AC/DC |
| Current Rating | 1 A or 5 A |
| Current Input | 1 A / 5 A |
| Power Supply | 24-250 V DC / 48-250 V AC |
| Protection Functions | thermal overload |
| Communication Protocols | IEC 61850, Modbus |
| Housing | Metal |
| Enclosure | IP20 |
Explains icons used for safety and important information in the manual.
Identifies the target readers and users of this operator's manual.
Lists the key technical features and capabilities of the REM 610 relay.
Describes the Human-Machine Interface components and their functionalities.
Details the physical layout and components of the relay's front panel.
Explains navigation and interaction using the HMI buttons for control.
Explains the relay's display functions, modes, and self-test procedures.
Outlines the different operational modes of the relay's display screen.
Details the password protection system for HMI access and settings.
Differentiates between user and technical levels for HMI interaction and access.
Guides on viewing current and other measured parameters via the HMI.
Explains advanced settings, parameter management, and technical access.
Describes the process of modifying relay configuration parameters and values.
Explains how relay status and faults are indicated via LEDs and messages.
Details the function, status, and meaning of the relay's target LEDs.
Describes the green LED's indication for power status and internal relay faults.
Explains the yellow LED's indication for pickup, alarm, and blocking states.
Covers text-based messages indicating relay status, operation, and faults.
Details messages related to protection element pickup, trip, and alarm events.
Explains the relay's internal monitoring system and fault reporting mechanisms.
Information about the relay's modular plug-in unit design and handling.
Step-by-step guide for removing and fitting the relay's plug-in unit.
Instructions for replacing the battery within the relay's plug-in unit.
Procedures for verifying correct initial operation, settings, and signals.
Recommendations for routine checks, preventive maintenance, and hardware verification.
Process for confirming the accuracy of the relay's current and fault measurements.
Describes how to test individual relay functions and output contact operations.
Details methods for testing specific protection elements like short-circuit and ground-fault.
Specific steps and calculations for testing short-circuit protection.
Details regarding the relay's plug-in unit as a spare part and its compatibility.
Information on the type, specifications, and sources for replacement batteries.
To Next Page
