EasyManua.ls Logo

ABB REM 610 - Detachable Plug-in Unit

ABB REM 610
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 4.3.2.3.-2 Warning codes (Continued)
Fault Weighting
factor
Description
Sensor circuit open or
shorted (RTD3)
256 Circuit is open or shorted
a
*
Check wiring of sensor
*
Check that sensor is not broken
Sensor circuit open or
shorted (RTD4)
512 Circuit is open or shorted
a
*
Check wiring of sensor
*
Check that sensor is not broken
Sensor circuit open or
shorted (RTD5)
1024 Circuit is open or shorted
a
*
Check wiring of sensor
*
Check that sensor is not broken
Sensor circuit open or
shorted (RTD6)
2048 Circuit is open or shorted
a
*
Check wiring of sensor
*
Check that sensor is not broken
Thermistor circuit open or
shorted (Thermistor1)
4096 Circuit is open or shorted
a
*
Check wiring of sensor
*
Check that sensor is not broken
Thermistor circuit open or
shorted (Thermistor2)
8192 Circuit is open or shorted
a
*
Check wiring of sensor
*
Check that sensor is not broken
Σ: 16383
a)
Temperature protection elements are out of operation
4.4. Detachable plug-in unit
4.4.1. Identifying the product
You can find the order number on a label under the lower handle of the relay.
When checking the order number of the relay plug-in unit, be careful
not to lift the handle more than 25º (approx. 40 mm). Lifting the handle
any further detaches the plug-in unit from the case.
46
REM 610REM 610
Motor Protection Relay
Operator's Manual - ANSI ve rsion
1MRS755538

Table of Contents

Other manuals for ABB REM 610

Related product manuals