ABB REM 610 - Default Chapter; Table of Contents

3
Contents
Copyrights ................................................................................. 5
1. Introduction..............................................................7
1.1. This manual.............................................................. 7
1.2. Use of symbols ......................................................... 7
1.3. Intended audience ..................................................... 7
1.4. Product documentation ............................................... 8
1.5. Document conventions ............................................... 8
1.6. Document revisions.................................................... 9
2. Safety information...................................................11
3. Product overview .................................................... 13
3.1. Use of the relay....................................................... 13
3.2. Features................................................................. 13
4. Operation ............................................................... 15
4.1. HMI features ........................................................... 15
4.1.1. Front panel ................................................. 15
4.1.2. How to use the push buttons ......................... 15
4.1.3. Display....................................................... 16
4.1.3.1. Display test at power up ................. 16
4.1.3.2. Display modes .............................. 17
4.1.3.3. Display backlight ........................... 18
4.1.3.4. How to adjust the display contrast.... 18
4.1.4. Main menu ................................................. 18
4.1.5. Submenu.................................................... 19
4.1.6. HMI passwords ........................................... 19
4.1.7. SPA password............................................. 21
4.1.8. How to select language ................................ 21
4.1.9. How to set the real-time clock........................ 22
4.1.10. How to switch between front and rear
connection.................................................. 23
4.1.10.1. Target LED for front communication... 24
4.1.11. How to select the protocol for rear
communication ............................................ 24
4.2. HMI operation levels ................................................ 25
4.2.1. User level ................................................... 25
4.2.1.1. Menu groups of the user level ......... 25
4.2.1.2. How to monitor measured values ..... 26
4.2.1.3. How to monitor recorded data ......... 28
4.2.1.4. INFO menu group.......................... 29
4.2.2. Technical level............................................. 30
4.2.2.1. Menu system of parameters ............ 30
4.2.2.2. How to change settings .................. 30
Motor Protection Relay
Operator's Manual - ANSI ve rsion
REM 610REM 610
1MRS755538
Issued: 01.04.2005
Version: B/31.01.2007