ABB REM 610 - Configuration

Main Menu
Group Menu
Parameter Menus
SETTINGS
CONFIGURATION
MEASUREMENTS
RECORDED DATA
GROUP 1/GROUP 2
NEW TRIP IND.
DEMAND SETTINGS
SETTINGS
PROTECT. ELEMENTS
SETTINGS
SETTINGS
* GRP 1 :xxx
GRP 2 :xxx
GRP 2 :xxxxxxxx
SETTINGS
* GRP 1 :xxxxxxxx
GRP 2 :xxxx
SETTINGS
* GRP 1 :xxxx
SETTINGS
SETTINGS
SETTINGS
GRP 2 :xxxxxxxx
SETTINGS
* GRP 1 :xxxxxxxx
SGL
SGF
SGB
SGR
49/38-1 ELEMENTS
49/38-2 ELEMENTS
SGR5 :xxxxxx
SGR2 :xxxxxx
SGR3 :xxxxxx
SGR4 :xxxxxx
SGR1 :xxxxxx
SGL5 :xxxxxxx
SGL2 :xxxxxxx
SGL3 :xxxxxxx
SGL4 :xxxxxxx
SGL6 :xxxxxxx
SGL7 :xxxxxxx
SGL1 :xxxxxxx
SGL8 :xxxxxxx
SGF5 :xxx
SGF2 :xxx
SGF3 :xxx
SGF4 :x
SGF1 :xxx
SGB5 :xxxxx
SGB2 :xxxxx
SGB3 :xxxxx
SGB4 :xxxxx
SGB1 :xxxxx
Edit/Confirm
Cancel
FLA SECONDARY
INFO
A070079
Fig. 4.2.2.2.-3 Settings for switchgroups
Parameter Menu
* GRP 1 :xxx
SETTINGS
GRP 2 :xxx
* GRP 1 :x x
SETTINGS
Scroll for the desired bit
Set the bit state (0 or 1)
Confirm
Cancel
A040259
Fig. 4.2.2.2.-4 Setting bits
4.2.2.3. Configuration
In general, the parameters found under CONFIGURATION are set only once by the
customer, that is, prior to commissioning of the relay.
34
REM 610REM 610
Motor Protection Relay
Operator's Manual - ANSI ve rsion
1MRS755538