ABB REM 610 - INFO Menu Group

29
MOTOR START-UP
Main Menu
Group Menu
Parameter Menus
SETTINGS
CONFIGURATION
MEASUREMENTS
RECORDED DATA
NUMBER OF PICKUPS
5. EVENT
4. EVENT
3. EVENT
RECORDED DATA
1. EVENT
2. EVENT
RECORDED DATA
RECORDED DATA
RECORDED DATA
1. 49/38-2A %:xxx
1. 49/38-2T %:xxx
1. 49/38-1A %:xxx
1. 49/38-1T %:xxx
INFO
1. PTC1 k
W:x.x
1. PTC2 k
W:x.x
1. RTD6
°C+:xxx
1. la FLAx x.xx
1. lb FLAx x.xx
1. lc FLAx x.xx
1. 50P DUR%:xxx
1. 48/14 DUR%:xxx
1. 37 DUR%:xxx
1. In CT% x.xx
1. 46 FLAx x.xx
1. 46 DUR%:xxx
1. I
2
* t %:xxx
1. 51N DUR%:xxx
1. # MotSt :xxx
1. RTD1
°C+:xxx
1. RTD3
°C+:xxx
1. RTD4
°C+:xxx
1. RTD5
°C+:xxx
1. RTD2 °C+:xxx
1. hh.mm;ss.sss
1. YY-MM-DD
Max IP FLAx x.xx
Start time s:xxx
48/14 PU :x
37 PU :x
51N PU :x
46 PU :x
50P PU :x
1. TH PU %:xxx
1. TH TR %:xxx
Cancel
A070068
Fig. 4.2.1.3.-1 Monitoring recorded data
4.2.1.4. INFO menu group
The main menu group INFO contains information which you may need when
ordering repair service.
1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select INFO and press
to enter the first submenu.
The first submenu shows the device type, relay serial number, test date, the CPU
module as well as the optional RTD module.
3. For specific information on the CPU module, use
to select CPU MODULE and
press
to view the CPU software number and revision. While in the CPU
software number and revision view, press
to view the CPU build number or
to view the CPU serial number.
4. Use the arrow buttons to monitor the corresponding information on the optional
RTD module.
5. To return the display to the idle mode, press
.
Motor Protection Relay
Operator's Manual - ANSI ve rsion
REM 610REM 610
1MRS755538