Function name Signal type Signal name Description
Motor startup supervision
(STTPMSU)
Analog inputs STTPMSU.1.START_CNT Number of motor start-ups
occurred
Binary inputs STTPMSU.1.MOT_START Signal to show that motor
startup is in progress
STTPMSU.1.OPR_IIT Operate/trip signal for thermal
stress.
STTPMSU.1.LOCK_START Lock out condition for restart of
motor.
STTPMSU.1.OPR_STALL Operate/trip signal for stalling
protection.
Phase reversal (PREVPTOC) Binary inputs PREVPTOC.1.START Started signal
PREVPTOC.1.OPERATE Operated signal
Loss of load supervision
(LOFLPTUC)
Binary inputs LOFLPTUC.1.START Loss of load protection started
LOFLPTUC.1.OPERATE Loss of load protection operated
Motor stall protection
(JAMPTOC)
Binary inputs JAMPTOC.1.START Started signal
JAMPTOC.1.OPERATE Operated
Negative-phase-sequence time
overcurrent protection
(MNSPTOC)
Binary inputs MNSPTOC.1.START Started
MNSPTOC.1.OPERATE Operated
MNSPTOC.1.BLK_RESTART Signal for blocking reconnection
of an overheated machine
Tap position indication
(TPOSSLTC)
Analog inputs TPOSSLTC.1.TAP_POS Tap position value as integer
Binary inputs TPOSSLTC.1.TAP_POS_IV TAP_POS invalidity status
Three-phase inrush current
detector (INRPHAR)
Binary inputs INRPHAR.1.BLK2H Second harmonic based block
INRPHAR.1.BLK2H_A Second harmonic based block,
phase A
INRPHAR.1.BLK2H_B Second harmonic based block,
phase B
INRPHAR.1.BLK2H_C Second harmonic based block,
phase C
Transient/intermittent earth-fault
(INTRPTEF)
Binary inputs INTRPTEF.START Start signal
INTRPTEF.OPERATE Operate signal
INTRPTEF.BLK_EF Block signal for EF to indicate
opposite direction peaks
Versatile Switch (VSGGIO) Binary inputs VSGGIO.1.POS1 Position 1 indication, logical
signal
VSGGIO.1.POS2 Position 2 indication, logical
signal
Double bit indications VSGGIO.1.POSITION Position indication, integer
1MRS756791 A Section 2
DNP3 data mappings
630 series 39
Point List Manual
To Next Page
Loading...
