Need help?Do you have a question about the ABB ACS880 Series and is the answer not in the manual?
General| Cooling Method | Air-cooled, liquid-cooled |
|---|---|
| Enclosure class | IP21, IP55 |
| Mounting type | Wall-mounted |
| Control method | Direct torque control (DTC) |
| Braking chopper | Integrated or external |
| Communication | Ethernet |
| Protection Features | Overcurrent, overvoltage, undervoltage, overload, short circuit, overtemperature, earth fault |
| Operating Temperature Range | -15°C to +50°C |
| Storage Temperature Range | -40°C to +70°C |
| Relative Humidity | 5 ... 95 % (non-condensing) |
| Safety features | Safe torque off (STO) |
States that only qualified specialists can install, control, and maintain ATEX-certified functions.
Details essential safety measures to be followed before performing any installation or maintenance work on the drive.
Describes the Pt100 sensor-based motor temperature monitoring function for hazardous atmospheres.
Explains how Pt100 relays detect overtemperature and activate the STO function.
Details manual reset configuration for Pt100 relays to meet ATEX manual reset requirements.
Provides wiring guidelines for sensor circuits in potentially explosive atmospheres.
Shows a sample wiring diagram for Pt100 relays connected to digital inputs.
Covers the steps for start-up and acceptance testing of the Pt100 thermal protection function.
Details how to configure manual reset and status indications for temperature protection.
Details parameters related to the Safe Torque Off (STO) function of the FSO module.
Covers parameters for the Safe Stop 1 (SS1) function, used for overtemperature situations.
Lists technical data for PTC thermistor relays, including ordering information.
Introduces technical data for Pt100 relays and their associated hardware.
Provides details of the EU-Type Examination Certificate for the ATEX system.
Presents the EU Declaration of Conformity confirming compliance with ATEX directives.
Shows the circuit diagram for PTC monitoring with two relays.
Illustrates the circuit diagram for PTC monitoring with an FSO-12 module.
Displays the circuit diagram for Pt100 monitoring with three relays.
Shows the circuit diagram for Pt100 monitoring with five relays and an FSO-12 module.
To Next Page
