6
Installation
For information about how to mount and install the equipment, follow
the instructions in the Installation Guide at the end of this manual.
E Warning – Working with high voltage is potentially lethal. Per-
sons subjected to high voltage may suffer cardiac arrest, burn
Pulse frequency 1000 imp/kWh
Pulse length 40 ms
EMC compatibility
Impulse voltage test 6 kV 1.2/50μs (IEC 60060-1)
Surge voltage test 4 kV 1.2/50μs (IEC 61000-4-5)
Fast trans. burst test 4 kV ( IEC 61000-4-4 )
Immunity HF-fields 80 MHz - 2 GHz at 10 V/m (IEC61000-4-3)
Immunity conducted 150kHz – 80MHz ( IEC 61000-4-6 )
RF Emission EN 55022, class B (CISPR22)
ESD 15 kV ( IEC 61000-4-2 )
Standards IEC 62052-11, IEC 62053-21 class 1, GB/T
17215.211-2006, GB/T 17215.321-2008
class 1 & 2, GB 4208-2008, EN 50470-1,
EN 50470-3 category B
Technical Data
C13_install.book Page 6 Thursday, May 30, 2013 4:36 PM
To Next Page
Loading...
