Submenu: Autotest
Select “Autotest” and press the OK button to start the verification of the protective functions.
Submenu: General settings
Contents of submenu Options Configuration possibilities Step size Device default
Local command Local command [disabled], [enabled] enabled
Change password [****]
Language Language [Italiano], [English] Italiano
Display Switch-off delay [10] - [600] s 1 s 10 s
Contrast [0] - [9] 1 5
Password Protection [disabled], [enabled] disabled
Change password [****] 0000
Load settings „Setting name“
Save settings „Setting name“
Information
Submenu: Error memory
Contents of submenu Options Configuration possibilities Device default
Error list
Error recording Remote trip [disabled], [enabled] enabled
Power OFF [disabled], [enabled] enabled
Reset error memory
Operating counter
Cumulated OFF-time
12
To Previous Page
Loading...
