ABB HT562167 - User Manual

130 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Operation Manual

Turbocharging

ABB Turbo Systems Ltd



ABB Turbo Systems Ltd

CH 5401 Baden

Type TPS 48E01 HT562167

n

Mmax

1000 t

Mmax

680

n

Bmax

950 t

Bmax

650

1/s °C

SOLD08 00180 12 60 60

Year 2013

made in Switzerland

Application according to

the Operation Manual

kg

HZTL2410 English

TPS 48E01

Original Operation Manual

Table of Contents

Questions and Answers

G
gdiazSep 15, 2025
What to do if there is a reduction in speed of ABB Battery Charger?
- T
  tylermorenoSep 15, 2025
  If your ABB Battery Charger experiences a reduction in speed, there might be several reasons. It could be due to defects of connected cylinders when pulse charging, which requires contacting the enginebuilder. Another cause might be heavy contamination of the turbine, which requires cleaning. Damaged rotor components or bearing also can cause the problem, and in this case you should contact an ABB Turbocharging Service Station. Finally, defects such as leaks in the exhaust gas pipes or charge air ducts can lead to speed reduction, and these should be repaired.
M
Marie BurgessAug 25, 2025
Is rubbing of rotating parts in ABB HT562167 Industrial Equipment a problem?
- T
  tyrone36Aug 25, 2025
  Rubbing of rotating parts in ABB Industrial Equipment can be normal behavior and not a malfunction. However, if there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
A
Ana LaneAug 25, 2025
What to do if rotating parts are rubbing in ABB HT562167?
- L
  Leslie MillerAug 26, 2025
  If you suspect rubbing of rotating parts within your ABB Industrial Equipment, and there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
O
owensdanielAug 26, 2025
What to do if ABB HT562167 has rubbing of rotating parts?
- J
  Jennifer SharpAug 27, 2025
  If you suspect rubbing of rotating parts in your ABB Industrial Equipment, and you're unsure about the extent of the rubbing, it's best to contact an ABB Turbocharging Service Station. They can perform a dimension check to assess the situation.
A
Anna SotoSep 16, 2025
Why is the lubricating oil pressure too low in my ABB Battery Charger?
- O
  owestSep 17, 2025
  If the lubricating oil pressure is too low in your ABB Battery Charger, it could be due to several reasons. The oil filter might be heavily contaminated, which means it should be cleaned. Another possibility is a defective oil pump in the lubricating system, which needs to be checked or replaced. The manometer display could be wrong, requiring replacement of the manometer. Alternatively, the rotor axial clearance might be too large, which requires contacting an ABB Turbocharging Service Station.
S
Sarah MccarthySep 23, 2025
What to do if ABB Battery Charger has vibrations?
- M
  Melissa AlexanderSep 23, 2025
  If you're experiencing vibrations with your ABB Battery Charger, it's likely due to rotor unbalance. In this case, you should contact an ABB Turbocharging Service Station.
B
brittanylopezSep 8, 2025
What causes charge air pressure to be too high in ABB Battery Charger?
- J
  Joan MorenoSep 8, 2025
  If the charge air pressure of your ABB Battery Charger is too high, it could be due to a malfunctioning or poorly adjusted injection system. You should repair it or contact the manufacturer, or correct it.
S
Stacey RoblesSep 9, 2025
Why ABB Battery Charger makes noises during run-down?
- T
  Tiffany WallaceSep 9, 2025
  If your ABB Battery Charger is experiencing noises during run-down, the turbocharger may be contaminated, requiring cleaning. Alternatively, there may be a damaged bearing, in which case you should contact an ABB Turbocharging Service Station.
S
Sarah HowellSep 2, 2025
What to do if ABB Battery Charger is surging?
- G
  Gregory HarmonSep 2, 2025
  If your ABB Battery Charger is experiencing turbocharger surging, the guard in front of the turbocharger may be contaminated or damaged, requiring cleaning or replacement. Alternatively, the filter silencer or diffuser could be contaminated, in which case you should clean it. Another possibility is a contaminated cooler, which would also need cleaning.
A
Allison KochAug 31, 2025
What to do if ABB Industrial Equipment is vibrating?
- T
  Tonya VargasSep 1, 2025
  If your ABB Industrial Equipment is vibrating, it may be due to rotor unbalance. In this situation, contact an ABB Turbocharging Service Station.

ABB HT562167 Specifications

General

Brand	ABB
Model	HT562167
Category	Industrial Equipment
Language	English

Related product manuals