To Next Page
K
Kyle MooreSep 2, 2025
What to do if lubricating oil pressure is too low in ABB HT580740?
- CCole LongSep 2, 2025
If the lubricating oil pressure is too low, the oil filter may be heavily contaminated and needs cleaning. Alternatively, the oil pump in the lubricating system could be defective and requires checking or replacement. A wrong reading on the manometer display can also cause this issue, so replace the manometer. In some instances, the rotor axial clearance may be too large, which requires contacting an ABB Turbocharging Service Station.
General