ABB HT584310 User Manual

132 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Operation Manual

ABB Turbocharging



ABB Turbo Systems Ltd

CH 5401 Baden

Type TPS48-F32 HT584310

n

Mmax

1033 t

Mmax

680

n

Bmax

981 t

Bmax

650

1/s °C

SOLD06 00180 16 60 60

Year 2018

made in Switzerland

Application according to

the Operation Manual

kg

HZTL2412 English

TPS48-F32

Original Operation Manual

Table of Contents

Questions and Answers:

A
Anna JohnsonSep 2, 2025
What to do if lubricating oil pressure is too low in ABB HT584310 Industrial Equipment?
- L
  loriwhiteSep 2, 2025
  If the lubricating oil pressure is too low, the oil filter may be heavily contaminated and needs cleaning. Alternatively, the oil pump in the lubricating system could be defective and requires checking or replacement. A wrong reading on the manometer display can also cause this issue, so replace the manometer. In some instances, the rotor axial clearance may be too large, which requires contacting an ABB Turbocharging Service Station.
C
Cindy GreenSep 3, 2025
Why is there a reduction in speed in ABB HT584310 Industrial Equipment?
- A
  autumnhessSep 3, 2025
  A reduction in speed could stem from defects in connected cylinders during pulse charging, in which case you should contact the enginebuilder. Other potential causes include heavy contamination of the turbine (clean it), damaged rotor components or bearing (contact an ABB Turbocharging Service Station), or defects like leaks in the exhaust gas pipes or charge air ducts (make repairs).
C
Cheryl TurnerSep 3, 2025
What to do if ABB HT584310 Industrial Equipment has charge air pressure too low?
- C
  Cathy TaylorSep 3, 2025
  If the charge air pressure is too low, there could be several reasons. The air receiver or the gas piping between the engine and the turbine might be leaking. A poorly adjusted injection system also can cause this issue, so correct it. The manometer display might be providing a wrong reading, so replace the manometer, or the line to the manometer might be leaking, so repair the leak. A contaminated filter silencer causing excessive loss of pressure can also be the reason, so clean it. In some cases, the compressor/turbine might be damaged, which requires contacting an ABB Turbocharging Service Station. High exhaust counterpressure can also cause low charge air pressure, so clean or repair the boiler or exhaust silencer.

ABB HT584310 Specifications

General

Brand	ABB
Model	HT584310
Category	Industrial Equipment
Language	English

Related product manuals

Preview: ABB HT584159