EasyManua.ls Logo

ABB HT842133 - User Manual

ABB HT842133
130 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operation Manual
Turbocharging
ABB Turbo Systems Ltd

ABB Turbo Systems Ltd
CH 5401 Baden
Type TPS 52E01 HT842133
n
Mmax
859 t
Mmax
680
n
Bmax
816 t
Bmax
650
1/s °C
SOLD08 00250 12 60 60
Year 2016
made in Switzerland
Application according to
the Operation Manual
kg
HZTL2410 English
TPS 52E01
Original Operation Manual

Table of Contents

Questions and Answers

  • L
    Laura BooneSep 1, 2025
    Why is the exhaust gas temperature too high in my ABB Battery Charger?
    • A
      anthonyvelezSep 1, 2025
      High exhaust gas temperature in your ABB Battery Charger can stem from several issues: * A malfunctioning injection system, which needs repair or manufacturer consultation. * Air starvation due to a clogged filter silencer, requiring cleaning. * High exhaust counterpressure, necessitating cleaning or repair of the boiler or exhaust silencer. * A dirty cooler, which should be cleaned. * Insufficient cooling water volume, requiring a top-up. * High cooling water entry temperature, indicating a need to inspect/clean the cooling system. * Inadequate ventilation, suggesting improved ventilation.
  • D
    Daniel DavisSep 12, 2025
    Why is my ABB Industrial Equipment experiencing a sluggish start-up?
    • R
      rpageSep 12, 2025
      A sluggish start-up in ABB Industrial Equipment can occur due to several reasons. It might be caused by a contaminated turbocharger, in which case you should clean it. Alternatively, it could be due to a damaged bearing, requiring you to contact an ABB Turbocharging Service Station. Other possible causes are a rubbing rotor or a foreign object in the turbocharger.
  • A
    Amber FowlerAug 30, 2025
    What to do if ABB Industrial Equipment has rubbing of rotating parts?
    • E
      Eric GarzaAug 30, 2025
      If you suspect rubbing of rotating parts in your ABB Industrial Equipment, and you're unsure about the extent of the rubbing, it's best to contact an ABB Turbocharging Service Station. They can perform a dimension check to assess the situation.
  • M
    mark64Sep 13, 2025
    Why does my ABB HT842133 have vibrations?
    • D
      duncanannaSep 13, 2025
      Vibrations in your ABB Industrial Equipment may be due to rotor unbalance. In this case, you should contact an ABB Turbocharging Service Station.
  • W
    William HernandezSep 13, 2025
    What to do if ABB Industrial Equipment has vibrations?
    • K
      Kurt JonesSep 13, 2025
      If your ABB Industrial Equipment is experiencing vibrations, it could be due to a rotor unbalance. In this case, contact an ABB Turbocharging Service Station. Vibrations may also be caused by a damaged turbine or compressor, or a damaged bearing.
  • S
    Samantha WilliamsSep 18, 2025
    Why is the lubricating oil pressure too low in my ABB Battery Charger?
    • J
      Juan ReyesSep 18, 2025
      If the lubricating oil pressure is too low in your ABB Battery Charger, it could be due to several reasons. The oil filter might be heavily contaminated, which means it should be cleaned. Another possibility is a defective oil pump in the lubricating system, which needs to be checked or replaced. The manometer display could be wrong, requiring replacement of the manometer. Alternatively, the rotor axial clearance might be too large, which requires contacting an ABB Turbocharging Service Station.
  • A
    Alicia BoydSep 23, 2025
    How to fix sluggish start-up of ABB Battery Charger?
    • A
      Alicia HoffmanSep 23, 2025
      A sluggish start-up in your ABB Battery Charger can be caused by a contaminated turbocharger, in which case you should clean it. Alternatively, it might be due to a damaged bearing, which requires you to contact an ABB Turbocharging Service Station.
  • E
    Emma KingAug 27, 2025
    How to deal with rubbing of rotating parts in ABB Industrial Equipment?
    • S
      Steven CampbellAug 27, 2025
      If you notice rubbing of rotating parts within your ABB Industrial Equipment, and there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
  • A
    Albert AndersonAug 26, 2025
    Why is my ABB Industrial Equipment start-up sluggish?
    • A
      alexhermanAug 26, 2025
      A sluggish start-up of your ABB Industrial Equipment can be attributed to several factors. The turbocharger may be contaminated and needs cleaning. Alternatively, there could be a damaged bearing, in which case you should contact an ABB Turbocharging Service Station. Other possible causes include a rubbing rotor or a foreign object present in the turbocharger.
  • J
    Joanna OconnorAug 25, 2025
    What to do if ABB HT842133 has vibration?
    • B
      Brandi DaughertyAug 26, 2025
      If your ABB Industrial Equipment is vibrating, it could be due to rotor unbalance, in which case you should contact an ABB Turbocharging Service Station. Other potential causes include a damaged turbine or compressor, or a damaged bearing.

ABB HT842133 Specifications

General IconGeneral
BrandABB
ModelHT842133
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals