EasyManua.ls Logo

ABB HT842166 - User Manual

ABB HT842166
130 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operation Manual
ABB Turbocharging

ABB Turbo Systems Ltd
CH 5401 Baden
Type TPS48-F33 HT842166
n
Mmax
1018 t
Mmax
750
n
Bmax
967 t
Bmax
710
1/s °C
SOLD08 00180 12 50 50
Year 2016
made in Switzerland
Application according to
the Operation Manual
kg
HZTL2412 English
TPS48-F33
Original Operation Manual

Table of Contents

Questions and Answers

  • A
    Amy ColeAug 31, 2025
    Why is there a reduction in speed in my ABB Industrial Equipment?
    • W
      Whitney CoxAug 31, 2025
      If your ABB Industrial Equipment exhibits a reduction in speed, it could stem from several issues. Defects in connected cylinders during pulse charging may be the cause, in which case you should contact the engine builder. Alternatively, heavy contamination of the turbine could be the problem, requiring cleaning. Damaged rotor components or bearings can also lead to speed reduction, necessitating contacting an ABB Turbocharging Service Station. Finally, defects like leaks in the exhaust gas pipes or charge air ducts can contribute, and these should be repaired.
  • B
    Brittney QuinnSep 9, 2025
    Why does my ABB HT842166 have vibrations?
    • K
      Kristin BakerSep 9, 2025
      Vibrations in your ABB Industrial Equipment may be due to rotor unbalance. In this case, you should contact an ABB Turbocharging Service Station.
  • T
    Thomas RobertsAug 29, 2025
    How to fix sluggish start-up in ABB HT842166?
    • J
      Jessica RomeroAug 29, 2025
      A sluggish start-up of your ABB Industrial Equipment could be caused by a contaminated turbocharger, which you can resolve by cleaning it. It may also be due to a damaged bearing, in which case you should contact an ABB Turbocharging Service Station. Other potential causes are rubbing rotor or a foreign object in the turbocharger.
  • J
    Joseph WarnerSep 23, 2025
    How to fix sluggish start-up of ABB Battery Charger?
    • C
      Christopher AdamsSep 23, 2025
      A sluggish start-up in your ABB Battery Charger can be caused by a contaminated turbocharger, in which case you should clean it. Alternatively, it might be due to a damaged bearing, which requires you to contact an ABB Turbocharging Service Station.
  • M
    Mary SwansonSep 12, 2025
    What to do if rotating parts of ABB Industrial Equipment are rubbing?
    • N
      Nicholas PerrySep 12, 2025
      Rubbing of rotating parts in ABB Industrial Equipment can be normal behavior and not a malfunction. If there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
  • P
    Patty WilsonSep 14, 2025
    How to troubleshoot turbocharger surging in ABB Industrial Equipment?
    • K
      Karen RuizSep 15, 2025
      To troubleshoot turbocharger surging in ABB Industrial Equipment, check the following: * If the guard in front of the turbocharger is contaminated or damaged, clean or replace it. * If the filter silencer or diffuser is contaminated, clean it. * If the cooler is contaminated, clean it.
  • N
    nramseySep 23, 2025
    What causes measured speeds to be too high in ABB Industrial Equipment?
    • J
      jimmyespinozaSep 23, 2025
      If measured speeds are too high in ABB Industrial Equipment, it could be due to a contaminated sensor tip. Dismantle the sensor, clean its tip, and refit the sensor using the specified tightening torque.
  • W
    William ArnoldAug 27, 2025
    How to fix a sluggish start-up in ABB HT842166?
    • A
      Alan StanleyAug 27, 2025
      If your ABB Industrial Equipment has a sluggish start-up, it might be due to a contaminated turbocharger, in which case you should clean it. Alternatively, a damaged bearing could be the cause, requiring you to contact an ABB Turbocharging Service Station.
  • C
    cmanningAug 26, 2025
    How to handle rubbing of rotating parts in ABB Industrial Equipment?
    • P
      Parker CooperAug 26, 2025
      If you notice rubbing of rotating parts in your ABB Industrial Equipment and are unsure about the extent of the rubbing, contact an ABB Turbocharging Service Station. Also, have a dimension check carried out by an ABB Turbocharging Service Station.
  • R
    Roberta JonesAug 25, 2025
    What to do if my ABB HT842166 has a sluggish start-up?
    • C
      Cristina LopezAug 26, 2025
      A sluggish start-up in your ABB Industrial Equipment can occur if the turbocharger is contaminated, in which case you should clean it. It can also happen if there is a damaged bearing, in which case you should contact an ABB Turbocharging Service Station.

ABB HT842166 Specifications

General IconGeneral
BrandABB
ModelHT842166
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals