ABB HT842166 User Manual

130 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Operation Manual

ABB Turbocharging



ABB Turbo Systems Ltd

CH 5401 Baden

Type TPS48-F33 HT842166

n

Mmax

1018 t

Mmax

750

n

Bmax

967 t

Bmax

710

1/s °C

SOLD08 00180 12 50 50

Year 2016

made in Switzerland

Application according to

the Operation Manual

kg

HZTL2412 English

TPS48-F33

Original Operation Manual

Table of Contents

Questions and Answers:

D
Dana WhiteSep 1, 2025
Why is the charge air pressure too low in my ABB HT842166 Industrial Equipment?
- W
  williamfergusonSep 1, 2025
  If the charge air pressure is too low in your ABB Industrial Equipment, several factors could be responsible. The air receiver might be leaky and needs repair. The injection system could be maladjusted and requires correction. A faulty manometer display can give incorrect readings, so replace it. A dirty filter silencer can cause excessive pressure loss, so clean it. Damaged compressor or turbine components may also be the cause, in which case you should contact an ABB Turbocharging service station. Finally, high exhaust counterpressure could be the issue; cleaning or repairing the boiler or exhaust silencer may resolve this.
D
Dr. Yolanda GardnerSep 2, 2025
What to do if the turbocharger is surging in ABB Industrial Equipment?
- B
  Bryan MaloneSep 2, 2025
  If your ABB Industrial Equipment's turbocharger is surging, it could be due to a few reasons. The guard in front of the turbocharger might be contaminated or damaged, requiring cleaning or replacement. Another possibility is that the filter silencer or diffuser is contaminated, and cleaning it should resolve the issue. Lastly, a contaminated cooler could also cause surging, so cleaning it is recommended.
D
David AustinSep 2, 2025
Why is the charge air pressure too high in my ABB HT842166 Industrial Equipment?
- R
  randallsextonSep 3, 2025
  If the charge air pressure is too high in your ABB Industrial Equipment, it could be due to a malfunction in the injection system, which needs repair, or you should contact the manufacturer. Another cause could be misaligned injection, which needs to be set correctly. Also, a defective manometer display can cause this issue, so replace the manometer.
K
Kevin Nash Jr.Sep 3, 2025
Why is my ABB Industrial Equipment experiencing vibration?
- R
  Richard ContrerasSep 3, 2025
  If you notice vibrations in your ABB Industrial Equipment, it's likely due to rotor unbalance. In this case, you should contact an ABB Turbocharging Service Station.

ABB HT842166 Specifications

General

Brand	ABB
Model	HT842166
Category	Industrial Equipment
Language	English

Related product manuals