ABB K-MAG 10D1476 - Page 52

7.0 PARTS LIST
TABLE 7-1. ANSI CLASS 150 GROUNDING RINGS
Meter Size ABB Part
Number*
Part Number Suffix (Material)
mm inch 316 sst Hast. "C" Hast. "B" Alloy 20
1 - 15
1
⁄
25
-
1
⁄
2
800D508 U01 U09 U34 U27
25 1 800D508 U02 U10 U18 U24
40 1
1
⁄
2
800D508 U03 U11 U35 U28
50 2 800D508 U04 U12 U20 ---
50 2 800D575 --- --- --- U07
80 3 800D508 U05 U13 U36 ---
80 3 800D575 --- --- --- U08
100 4 800D508 U06 U14 U37 ---
100 4 800D575 --- --- --- U09
* To complete the part number, add suffix from table; e.g., 800D508U02 for
ordering one set (2) of 25 mm (1 in.) 316 sst grounding rings.
TABLE 7-2. GASKETS FOR ANSI CLASS 150 GROUNDING RINGS (2 required)
KLINGER SIL C-4401-------Part Number 333J089U__*
GYLON Style 3500-----------Part Number 333J090U__*
Meter Size
Flange Rating
ANSI CL150
1 - 15 mm 25 mm 40 mm 50 mm 80 mm 100mm
1
⁄
25
-
1
⁄
2
inch 1 inch 1
1
⁄
2
inch 2 inch 3 inch 4 inch
Suffix U01 U10 U15 U19 U22 U29
* To complete the part number, add suffix from table; e.g., 333J089U10 for 25mm (1 inch)
meter with KLINGER SIL gaskets. For applications other than ANSI CLASS150 Flanges
contact the factory.
TABLE 7-3. GASKETS FOR METER BODY (2 required)
KLINGER SIL C-4401-------Part Number 333J089U__*
GYLON Style 3500-----------Part Number 333J090U__*
Meter Size
1 - 15 mm 25 mm 40 mm 50 mm 80 mm 100mm
1
⁄
25
-
1
⁄
2
inch 1 inch 1
1
⁄
2
inch 2 inch 3 inch 4 inch
Suffix U04 U05 U06 U07 U08 U09
* To complete the part number, add suffix from table; e.g., 333J089U05 for 25mm (1 inch)
meter with KLINGER SIL gaskets.
10D1476 K-MAG MAGNETIC FLOWMETER INSTRUCTION MANUAL
7-1