Need help?Do you have a question about the ABB NGC8206 and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Output | 4-20 mA, digital signals |
| Power Supply | 24 V DC |
| Protection Class | IP65 |
| Application | Natural Gas Analysis |
| Communication | Ethernet, Modbus |
| Measurement Range | 0-100% |
| Response Time | <1 second |
| Operating Temperature | -20°C to +50°C |
Outlines essential safety guidelines and warnings for installation, maintenance, and operation.
Explains the built-in diagnostic tests performed during NGC startup.
Guides the user through the initial setup process for the NGC.
Guides the user through the NGC startup configuration using a wizard.
Provides procedures for performing field calibration of the NGC.
Details how to reset the NGC to its factory default settings.
Focuses on identifying alarm causes during start-up diagnostics.
Focuses on determining causes of alarms during normal operation.
Provides tests for diagnosing common alarm conditions.
Guides users on troubleshooting power supply and related issues.
Provides procedures for troubleshooting communication issues with the NGC.
To Next Page
