ABB NGC8206

2
101510 Rev. AG Page 3–
37
Figure 3-37
ENC82L–Dual Bottle Rack Installation
Figure 3-38 ENC82S–Dual Bottle Rack Installation
8) Install carrier gas bottle in bottle rack.
9) Using chains, strap the bottle(s) to the rack by attaching a bolt snap to one of the
center chains.
Large Environmental Enclosure
Back Side
Bracket
Bottle Rack Option
P
/N: 2101076
Note: This option mounts to the side of
the stand and not to the Enclosure
Insert Bolt through split
and flat washer. Feed
through stand mounting
holes into nut.