Need help?Do you have a question about the ABB NBRA-659 and is the answer not in the manual?
Explains symbols used for dangerous voltage, general warnings, and ESD warnings.
Details general safety precautions for installation and maintenance work on the ACS 600 and braking chopper.
Guides on calculating maximum power (Pmax) generated by the motor during braking.
Explains how to select a suitable ACS 600/chopper/resistor combination based on PBRmax.
Details checking resistor heat dissipation capacity (Er) and resistance value.
Explains how to set the braking chopper's voltage level using a jumper based on mains voltage.
Details the step-by-step process for mounting the NBRA-653/663 chopper.
Provides detailed steps for mounting the NBRA-654/664 chopper onto the ACS 600 assembly plate.
Details the procedure for mounting NBRA-655/656/666 choppers inside the ACS 600.
Provides steps for mounting NBRA-657/667 choppers, including cable connections.
Outlines the mounting procedure for NBRA-658/659/669 choppers.
Details resistor cable stripping and connections at the braking chopper and resistor.
Lists faults detected by the control board and indicated by the relay output.
Provides a table mapping fault indications, causes, and recommended remedies.
Explains symbols used for dangerous voltage, general warnings, and ESD warnings.
Details general safety precautions for installation and maintenance work on the ACS 600 and braking chopper.
Guides on calculating maximum power (Pmax) generated by the motor during braking.
Explains how to select a suitable ACS 600/chopper/resistor combination based on PBRmax.
Details checking resistor heat dissipation capacity (Er) and resistance value.
Explains how to set the braking chopper's voltage level using a jumper based on mains voltage.
Details the step-by-step process for mounting the NBRA-653/663 chopper.
Provides detailed steps for mounting the NBRA-654/664 chopper onto the ACS 600 assembly plate.
Details the procedure for mounting NBRA-655/656/666 choppers inside the ACS 600.
Provides steps for mounting NBRA-657/667 choppers, including cable connections.
Outlines the mounting procedure for NBRA-658/659/669 choppers.
Details resistor cable stripping and connections at the braking chopper and resistor.
Lists faults detected by the control board and indicated by the relay output.
Provides a table mapping fault indications, causes, and recommended remedies.
General| Brand | ABB |
|---|---|
| Model | NBRA-659 |
| Category | Food Processor |
| Language | English |
To Next Page