ABB RE 54 - 5 HMI Operation Levels

1MRS750500-MUM
Feeder, Machine and Transformer Terminals
Operator’s Manual
RE_ 54_
17
5. HMI Operation Levels
The HMI has two main levels: the user level and the technical level. The user level
is for measurements and monitoring, whereas the technical level is used for terminal
programming and parameterization.
menupict_b
Fig. 5.-1 HMI operation levels and their structure
21 kV
CB OK
Setting group 1
MEASUREMENT
EVENT view
ALARM view
USER LEVEL (LEVEL 1)
TECHNICAL LEVEL (LEVEL 2)
MIMIC view MEASUREMENT view
EVENTS
NOC3Low 31/E1
1999-12-24
18:35:12.230
NOC3Low 31/E1
1999-12-24
18:35:12.330
NOC3High 32/E1
1999-12-24
14:25:52.720
NOC3High 32/E3
1999-12-24
14:25:52.760
Event list
MEAS ALARM
CB spring ready
SF6 gas density
Temperature
Interlocking
PARAMETER MENU
GROUP MENU
MAIN MENU
MAIN MENU
2 Sec
1 Sec
Protection
NOC3Low
SUBGROUP MENU
Operation mode
= Definite time
Start current
= 3.1 x In
Operate time
= 041.03 s
Time multiplier
= 0.78
IEEE time dial
= 0.5
C clears ALARMs
EVENT MIMIC
Updating values
MIMIC EVENT
Actual setting
Setting group 1
Setting group 2
Control setting
Input data
Output data
Recorded data 1
Recorded data 2
Recorded data 3
Status
Protection
Control
Cond. monit.
Measurement
Communication
General func.
Tests
Information
Configuration
CUB3Low_a
DEF2Low_a
DEF2High_a
DEF2Inst_a
Freq1_a
Freq2_a
Freq3_a
Freq4_a
Freq5_a
Inrush3_a
NEF1Low_a
NEF1High_a
NEF1Inst_a
NOC3Low_a
NOC3High_a
NOC3Inst_a
MIMIC view
ALARM MEAS
E MIMIC Submenu
, Move cursor
MainMenu Next
, Move cursor
Prev. Param.
, Move cursor
Prev. E Set
, Move cursor
IL1-A 00250.0
IL2-A 00252.0
IL3-A 00249.0
Io-A 00000.0
Iob-A 00000.0
Uo-V 000000
U1-kV 020.00
U2-kV 020.00
U3-kV 020.00
f-Hz 50.00
Demand values
IL1-A 00248.0
IL2-A 00251.0
IL3-A 00250.0
Power
P-kW 006928