ABB REF 54 Series User Manual

1MRS 750500-MUM
)HHGHU7HUPLQDODQG0DFKLQH7HUPLQDO
Operator’s Manual
5(BB
23
)LJ 3DUDPHWHUVHWWLQJ
 6DYLQJSDUDPHWHUV
When parameter values are changed, the new values take effect immediately, except
for the special parameters for measuring devices (refer to section “Setting a
parameter” on page 21). However, the new parameter values must be saved in the
non-volatile memory as follows:
,%\H[HFXWLQJWKHIROORZLQJVHTXHQFH
1. At technical level, select MAIN MENU/Configuration/General/
Store
2. Set the “Store” parameter to “Start/Progress”
3. Press [E] to confirm, the assisting window confirms the storage
25
,,%\PRYLQJIURPWKH0$,10(18WRWKH0,0,&YLHZ
• When [E] is pressed in the MAIN MENU to exit the technical level, the text
“Save parameters E = Yes, C = No” will appear in the assisting window if a
parameter has been changed
• Press [E] to save the changes in the non-volatile memory
• If [C] is pressed, parameters will not be saved in the non-volatile memory until
storing is initiated next time
• If neither [C] nor [E] is pressed, the changes will be saved when the backlight
time-out elapses
• If a parameter has been changed and confirmed with [E] as described in section
“Setting a parameter” but the technical level is not exited as described above,
the changes will be saved when the backlight time-out elapses
E
parames
E
C
Select parameter
Setting group 1
If numeric value or
character string,
select digit/char.
C
o
n
f
i
r
m
s
e
l
e
c
t
i
o
n
Scroll for
wanted value
for digit/char.
If enumerator,
select item
Confirm
G
i
v
e
p
a
s
s
w
o
r
d
2
Cancel
OR
Setting group 1
Setting group 1
Operation mode
= Definite time
Start current
= 3.1 x In
Operation time
= 041.03 s
Time multiplier
= 0.78
Operation mode
= Definite time
Start current
= 3.1 x In
Operation time
= 041.03 s
Time multiplier
= 0.78
Operation mode
= Definite time
Start current
= 3.1 x In
Operation time
= 041.03 s
Time multiplier
= 0.78
Operation mode
= Definite time
Start current
= 3.1 x In
Operation time
Operation mode
= Definite time
Start current
= 3.1 x In
Operation time
Operation mode
= Definite time
Start current
= 4.1 x In
Operation time
Operation mode
= Definite time
Start current
= 3.1 x In
Operation time
Operation mode
= Indefinite time
Start current
= 3.1 x In
Operation time

ABB REF 54 Series Specifications

General

Brand	ABB
Model	REF 54 Series
Category	Touch terminals
Language	English