3U
REMARKS
Optional
function
Function(s) not enabled by
default in preconfiguration,
can be enabled afterwards
No. of instances
enabled by default
Calculated
value
Io/Uo
No. of instances not enabled
by default in preconfiguration,
can be enabled afterwards
Io
∆Io
CONDITION MONITORING
AND SUPERVISION
10100011001100
101100101110010
1100111011010
10110110110100
1010001100110010100011001100
101100101110010
1100111011010
10110110110100
GENERATOR PROTECTION AND CONTROL IED
For directly connected generator set
PRE-
CONFIGURATION
PROTECTION
LOCAL HMI *
)
REG630
COMMUNICATION
Protocols:
IEC 61850-8-1
IEC 60870-5-103
DNP3
Interfaces:
Ethernet: TX (RJ45), FX (LC)
Serial: Serial glass fiber (ST),
Serial plastic fiber
(snap-in connector)
ALSO AVAILABLE
- 5 × prog. push buttons on LHMI
- Disturbance and fault recorders
- IED self-supervision
- Local/Remote push button on LHMI
- Sequence event recorder
- User management
- WebHMI
Uo
A
*
)
Fixed or detached LHMI is available.
MEASUREMENT
- I, U, Io, Uo, P, Q, E, pf, f
- Sequence current/voltage measurement
- Limit value supervision
- RTD/mA measurement (optional)
Analog interface types B
Current transformer 7
Voltage transformer 3
CONTROL AND INDICATION
1)
Object Ctrl
2)
CB 2
DC
8
ES
1)
Check availability of binary inputs/outputs
from technical documentation
2)
Control and indication function for
primary object
GUID-73E671D3-F46A-4778-8A7E-03AAED8AAACA V1 EN
Figure 4. Functionality overview for preconfiguration A
Generator Protection and Control
1MRS757583 C
Product version: 1.3
8 ABB