GUID-0B2A768F-7EFE-46A9-853F-DF66F4A8A5F2 V1 EN
Figure 9: Technical key information
2. Click OK.
The technical key is read from the IED and the Set Technical Key dialog box
opens.
GUID-6DC3DE88-93F3-474E-8CCD-326B278A7210 V1 EN
Figure 10: Setting the technical key
3. In Set Technical Key dialog box, select the technical key to be used. There are
three alternatives.
• Use the existing technical key in the IED
• Use the existing technical key defined for the IED object in PCM600
• Set a user-defined technical key, which changes the technical key for both
the physical IED and IED object in PCM600
4. Click OK to confirm the selection.
1MRS241255 B Section 3
PCM600 tool
611 series 27
Engineering Manual
To Next Page
Loading...
