Designed to communicate
IEC 61850 ANSI Function description Bay control
REC670 (A30)
REC670 (B30)
REC670 (C30)
Station communication
SPA communication protocol 1 1 1
LON communication protocol 1 1 1
IEC60870-5-103 communication protocol 20/1 20/1 20/1
Operation selection between SPA and IEC60870-5-103 for SLM 1 1 1
DNP3.0 for TCP/IP and EIA-485 communication protocol 1 1 1
DNP3.0 fault records for TCP/IP and EIA-485 communication protocol 1 1 1
Parameter setting function for IEC61850 1 1 1
IntlReceive Horizontal communication via GOOSE for interlocking 59 59 59
Goose binary receive 10 10 10
Multiple command and transmit 60/10 60/10 60/10
Ethernet configuration of links 1 1 1
IEC 62439-3 Edition 1 parallel redundancy protocol 1-P01 1-P01 1-P01
IEC 62439-3 Edition 2 parallel redundancy protocol 1-P02 1-P02 1-P02
Scheme communication
ZCPSCH 85 Scheme communication logic for distance or overcurrent protection 1-K01 1-K01 1-K01
ZCRWPSCH 85 Current reversal and weak-end infeed logic for distance protection 1-K01 1-K01 1-K01
ZCLCPLAL Local acceleration logic 1-K01 1-K01 1-K01
ECPSCH 85 Scheme communication logic for residual overcurrent protection 1-C31 1-C32 1-C33
ECRWPSCH 85 Current reversal and weak-end infeed logic for residual overcurrent protection 1-C31 1-C32 1-C33
1MRK511232-BEN E
Pre-configured
Product version: 1.2
8 ABB
To Next Page
Loading...
