Need help?Do you have a question about the ABB RELION REM615 and is the answer not in the manual?
General| Type | Feeder Protection and Control |
|---|---|
| Rated Frequency | 50/60 Hz |
| Operating Temperature | -25 °C to +55 °C |
| Input Voltage | 100-240 V AC/DC |
| Mounting | Panel mounting |
| Communication Protocols | IEC 61850, Modbus, DNP3 |
| Protection Functions | Overcurrent, earth fault |
| Dimensions | 177 mm |
| Rated Voltage | 100…240 V AC/DC |
Describes the manual's purpose, data point properties, and usage with protocol manuals.
Identifies intended readers and required knowledge for substation communication setup.
Details the product documentation set, manual usage, and revision history.
Explains safety symbols, manual conventions, and lists functions with IEC codes.
Introduces data mapping tables and explains column definitions for indications and controls.
Presents the detailed point list for REM615 version 3.0, including IEC 61850 names.
Details physical interface types, transmission speeds, and link layer for the protocol.
Covers application layer, transmission modes, address, and monitor/control data mapping.
Lists core application functions such as test mode, disturbance data, and private data.
Provides measurand scaling and private Class2 frame information.
Defines technical terms, abbreviations, and IEC standards used throughout the manual.
To Next Page
