3.3.3.7 Measurands in monitor direction
INF Semantics
⊠ <144> Measurand I
⊠ <145> Measurands I, V
⊠ <146> Measurands I, V, P, Q
⊠ <147> Measurands I
N
, V
EN
⊠ <148> Measurands I
L1,2,3
, V
L1,2,3
, P, Q, f
3.3.3.8 Generic functions in monitor direction
INF Semantics
<240> Read headings of all defined groups
<241> Read values or attributes of all entries of one group
<243> Read directory of a single entry
<244> Read value or attribute of a single entry
<245> End of general interrogation of generic data
<249> Write entry with confirmation
<250> Write entry with execution
<251> Write entry aborted
3.3.4 Selection of standard information numbers in control
direction
3.3.4.1 System functions in control direction
INF Semantics
⊠ <0> Initiation of general interrogation
⊠ <0> Time synchronization
3.3.4.2 Generic functions in monitor direction
INF Semantics
<240> Read headings of all defined groups
<241> Read values or attributes of all entries of one group
<243> Read directory of a single entry
<244> Read value or attribute of a single entry
<245> End of general interrogation of generic data
<249> Write entry with confirmation
<250> Write entry with execution
<251> Write entry aborted
1MRS756882 B Section 3
Interoperability profile for 615 series IEC 60870-5-103
REM615 25
Point List Manual
To Next Page
Loading...
