ABB RIO600 - Setting Up a Project for RIO600; Handling Connectivity Packages

10. Assembly diagram

2
3
4
5
6
7
1
1
2
GUID-57402DEF-96C5-4555-9254-BD644C9D5B40 V1 EN
Figure 8. Assembly drawings of RIO600 modules
1 Rubber cap
2 End clamp
3 PSM module
4 LECM module
5 Digital Input module
6 Digital Ouptput module
7 DIN Rail
The total length of the assembly can be
calculated by adding together length of all
modules.
The length of the end clamp depends on the
selected part. This mounting uses the Weidmuller
part EW 35 which is 8.5 mm wide.
11. Ordering data
Table 19. RIO600 module ordering details
Item Order number
Digital input module with 8 inputs MOD600ADIM8H
Digital output module with 4 outputs MOD600ADOM4R
Power supply module MOD600APSMH07
Communication module with RJ-45 port MOD600ALECMIR
12. Tools
The present status information of RIO600 can be
viewed from the Web-browser based user
interface (Web HMI) and the parameter setting
values can be viewed or changed from the
PCM600 tool in combination with the RIO600-
specific connectivity package.
Remote I/O 1MRS757487 A
RIO600
Product version: 1.0
ABB 17