ABB SACE Tmax T7D/PV - Configurations With Jumpers; Jumper Solutions for 0 NQ, 2 PS+2 PS, and 2 NQ

J
H I
In configurazione senza Jumpers
usare cavi ed eseguire prove di
tipo specifiche sull'installazione.
For configuration without Jumpers
use cable and perform specific
type test on the installation.
Per configurazioni di cablaggio diverse da quelle di
seguito rappresentate eseguire prove di tipo specifiche
sull'installazione e usare connessioni isolate.
For different wiring configurations than those shown
afterwards perform specific type test on the installation
and use insulated terminals connection.
LOAD
0NQ) 0NQ
UPPER SUPPLY
EF FCCuAl F F FCCuAl EF
1100 V 1100 V
1500 V 1500 V
1250 A 1600 A
2PS+2PS
LOWER SUPPLY
VR HR ES EF FCCuAl F F FCCuAl EF ES HR VR
1100 V 1100 V
1500 V 1500 V
1600 A1250 A
LOAD
2NQ
LOWER SUPPLY
ES EF FCCuAl F F FCCuAl EF ES
1100 V 1100 V
1500 V 1500 V
1250 A 1600 A
LOAD
2NQ
UPPER SUPPLY
EF F F EF
1100 V 1100 V
1500 V 1500 V
1250 A 1600 A
LOAD
Configurations with jumpers (possible solutions)
Tmax T7D/PV | ABB