Need help?Do you have a question about the ABB SensyTemp TSP111 and is the answer not in the manual?
General| Brand | ABB |
|---|---|
| Model | SensyTemp TSP111 |
| Category | Temperature Controller |
| Language | English |
Explains the international standard IEC 61508 safety integrity levels (SIL 1-4).
Overview of SensyTemp TSP series in applications according to safety standards.
Details the safety function for sensors with the TTH300 transmitter.
Explains alarm behavior and current output for error detection.
Details the safety function for sensors without a transmitter.
Describes periodic checks for sensors with TTH300 transmitter.
Safety inspections for the entire safety loop according to IEC 61508.
Step-by-step procedure to check the safety function of the device.
Outlines quick tests for sensors without transmitters.
Pre-commissioning checks for the safety function and device setup.
Steps to activate or deactivate write protection for safe operation.
Parameters affecting the safety function when write protection is disabled.
Formal declaration for functional safety according to IEC 61508.
Summary of hardware assessment for TSP1*1 and TSP3*1 with 4..20 mA output.
To Next Page
