GB
Operation
Lighting facilities can be switched and dimmed via operating
elements.
Notes
- After switching-off, the previously adjusted brightness
value remains stored (memory function). In case of
power failure, the memory touch controller STD-MTS
looses this value. When it is actuated next time, it will
switch on at maximum brightness (loss of memory
function).
- Upon its first actuation the memory touch controller
STD-MTS goes from light to dark and vice versa, whereby
the dimming direction is reversed at each stop. At
maximum brightness, the dimmer stops at minimum
brightness, the dimming direction changes.
- If "Brighter" is set by dimming, the dimming direction is
from minimum to maximum brightness.
To Next Page
Loading...
