Need help?Do you have a question about the ABB TPU 40.11 and is the answer not in the manual?
Defines environmental and operational parameters for transformers.
Details on transformer rating plates and their markings.
Guidelines for safe and correct transformer installation.
Critical safety precautions for handling and installing transformers.
Procedures and considerations for physically mounting the transformer.
How to connect the primary side of the transformer.
How to connect the secondary side of the transformer.
Details on fuses used with voltage transformers.
Explains the primary functions of current and voltage transformers.
Procedures for cleaning and maintaining the transformer's surface.
Methods and safety precautions for handling transformers.
Diagrams showing IEC wiring variants for voltage transformers.
Diagrams showing IEEE wiring variants for current transformers.
Shows different connection configurations for current transformers.
Shows different connection configurations for voltage transformers.
Defines environmental and operational parameters for transformers.
Details on transformer rating plates and their markings.
Guidelines for safe and correct transformer installation.
Critical safety precautions for handling and installing transformers.
Procedures and considerations for physically mounting the transformer.
How to connect the primary side of the transformer.
How to connect the secondary side of the transformer.
Details on fuses used with voltage transformers.
Explains the primary functions of current and voltage transformers.
Procedures for cleaning and maintaining the transformer's surface.
Methods and safety precautions for handling transformers.
Diagrams showing IEC wiring variants for voltage transformers.
Diagrams showing IEEE wiring variants for current transformers.
Shows different connection configurations for current transformers.
Shows different connection configurations for voltage transformers.
General| Rated secondary current | 5 A |
|---|---|
| Frequency | 50-60 Hz |
| Accuracy class | 0.5 |
| Rated short-time thermal current | 1 kA for 1 s |
| Rated dynamic current | 2.5 kA |
To Next Page
