Need help?Do you have a question about the ABB TPU Series and is the answer not in the manual?
Information on environmental conditions, ambient temperature, and transformer rating plate markings.
Guidelines for installation by skilled personnel, including general information and critical safety precautions.
Details on transformer mounting, primary/secondary connections, IP ratings, and voltage indicators.
Instructions for use, maintenance, transport, disposal, and general handling guidelines.
Secondary terminal marking examples for CTs/VTs and wiring diagrams per IEC/IEEE.
Damping ferroresonance in VTs and procedures for removing cable grommets from terminal covers.
Safe manual handling and methods for lifting transformers using belts and cranes.
Using self-locking hooks for safe transformer lifting via crane, including primary screw attachment.
Detailed dimensional drawings and specifications for TPU, TTR, BB, KOKS, and KOFA transformer models.
Detailed dimensional drawings and specifications for IHBF, TJC, TJCL, TJE, TJP, TDC, and TDP transformer models.
Detailed dimensional drawings and specifications for KGUGI/KGUG and external fuse holders.
Information on environmental conditions, ambient temperature, and transformer rating plate markings.
Guidelines for installation by skilled personnel, including general information and critical safety precautions.
Details on transformer mounting, primary/secondary connections, IP ratings, and voltage indicators.
Instructions for use, maintenance, transport, disposal, and general handling guidelines.
Secondary terminal marking examples for CTs/VTs and wiring diagrams per IEC/IEEE.
Damping ferroresonance in VTs and procedures for removing cable grommets from terminal covers.
Safe manual handling and methods for lifting transformers using belts and cranes.
Using self-locking hooks for safe transformer lifting via crane, including primary screw attachment.
Detailed dimensional drawings and specifications for TPU, TTR, BB, KOKS, and KOFA transformer models.
Detailed dimensional drawings and specifications for IHBF, TJC, TJCL, TJE, TJP, TDC, and TDP transformer models.
Detailed dimensional drawings and specifications for KGUGI/KGUG and external fuse holders.
General| Category | Transformer |
|---|---|
| Series | TPU |
| Primary Voltage | Up to 36 kV |
| Cooling Type | ONAN / ONAF |
| Rated Power | Up to 5 MVA |
| Frequency | 50 Hz / 60 Hz |
| Temperature Rise | As per applicable standards |
| Standards | IEC |
| Impedance | As per applicable standards |
To Next Page
