Abbott i-STAT Technical Bulletin

•
2 - Ping Server: Pressing allows the user to ping the CDS server. The handheld display will indicate if
t
he ping process was successful and will show the round-trip ping time in milliseconds. If the ping was
u
nsuccessful, a Ping Failed message (with an error code) will appear.
Pinging
Server
. . .
1 – Cancel
Ping
Successful
Time: 90ms
1 – Continue
Note: Pressing 1-Continue after the Ping Results screen
navigates the user back to the Wireless Menu.
2
• 3 - Test Server: Pressing allows the user to verify the connection to the CDS server. A message
Connection Successful or Connection Failed (with error code) will appear on the display following the test.
• 4 - Reset: Pressing resets the wireless module. The user will receive either a Reset Successful or
Reset Failed message (with an error code) on the display. Reset powers off and powers back on the wireless
module. It does not reset the settings to factory default.
Resetting
Wireless
Module
. . . .
1 – Cancel
Reset
Successful
1 – Continue
Note: Pressing 1-Continue after the
Reset screen navigates the user
back to the Wireless Menu.
4
3
Verifying
Connection
To Server
1 – Cancel
Connection
Successful
1 – Continue
Note: Pressing 1-Continue after the Test Server screen
navigates the user back to the Wireless Menu.
Art: 726025-01A 11Rev. Date 24-NOV-14

Abbott i-STAT Specifications

General

Type	Handheld blood analyzer
Power Source	Rechargeable lithium-ion battery
Display	Touchscreen LCD
Connectivity	Wireless
Sample Type	Whole blood
Test Cartridge Types	CG4+, CHEM8+, EG7+
Operating Temperature	15° to 30°C (59° to 86°F)
Battery Life	Approximately 8 hours
Humidity Range	10% to 90% non-condensing
Sample Volume	95 µL
Time to Results	2 minutes
Regulatory Approvals	FDA cleared, CE marked
Measurement Parameters	Blood gases, electrolytes, chemistries, coagulation, hematology