Step 4: Attach armrest
console to top of front post
using the 4 pre-attached
Allen head screws. Tighten
all bolts and screws using
tools provided. Cover bolts
with black plastic caps.
5
Step 5: Connect counter
wires in 2 locations
as shown. Install wire
protection covers to cover
wire connections.
Now you may safely cut
the strap that secures the
SEAT. (The strap with the
Caution label that says
“Do Not Cut”).
Step 3: Attach front post to curved
track. The front post is attached
to track in 2 locations as shown
using the 2 pre-attached Allen
head screws for each location.
Finger tighten only.
To Next Page
Loading...
