Abilica Stream TM 7 - Parts List; Welding Parts; Plastic Parts; Electric and Drive Parts

4
DELELISTE / DELLISTA / PARTS LIST
A. Welding parts
No. Description Qty No. Description Qty
A1 Base frame 1 A5 Incline frame 1
A2 Main frame 1 A6 Filter supporting frame 1
A3L Left upright 1 A11 Motor bracket 1
A3R Right upright 1
A4 Handrail bracket 1
B. Plastic parts
No. Description Qty No. Description Qty
B1 Console set 1 B13 Motor upper cover 1
B1-1 Overlay 1 B14 Motor back cover 1
B1-2 Membrane Key 1 B15 Side rail 2
B1-3 Console panel 1 B16L Left end cap 1
B1-5 I-Pad holder 1 B16R Right end cap 1
B2 Console cover 1 B17 Adjust wheel 2
B3 Protecting foam 2 B18 Silicon oil 1
B4 Handrail plug 2 B19 Power line deduction 1
B6 Transport wheel cap 2 B20 Round plug 1
B7 Transport wheel 2 B21 Inner plug 4
B8 Flat foot pad 2 B27 New cushion 6
B9 U-shaped foot pad 2 B31 Rubber pad 2
B10 Limit cushion 2 B32 Cushion 4
B11L Left side cover 1 B34 EVA pad(I-Pad holder) 1
B11R Right side cover 1 B49 Bottle holder 2
C. Electric and drive parts
No. Description Qty No. Description Qty
C1 DC motor 1 C13 Safety key 1
C2 Running belt 1 C14 Single cord (red) 300 1
C3 Rear roller 1 C15 Power line 1
C4 Front roller 1 C16 Console upper wire 1
C5 Running board 1 C17 Console lower wire 1
C6 Cylinder 1 C20 Magnetic ring 1
C7 Motor belt 1 C21 Inductor 1
C8 Power Switch 1 C22 Filter 1
C9 Controller 1 C27 Single cord (black) 300 2
C10 Handle pulse left keyboard 1 C28 Photoelectric Sensor 1
C11 Handle pulse right keyboard 1 C35 Single cord(CE) 1
C12 Incline motor 1
D. Hardware parts
No. Description Qty No. Description Qty
D1 Screw driver 13-15-17 1 D25 Spring washer M8 4
D2 Allen wrench T6 1 D29 Hex round head bolt M6*45 1
D3 Allen wrench T5 1 D31 Hex round head bolt M8*60 4