EN 10 Use
3.1 Induction technology 3.2 Using the appliance
Induction cooking is considered, just The i-Cooking appliance is operated by an
like gas cooking, as an energy friendly electronic touch control panel. By
way of cooking. It is based on the touching the symbols on the glass panel,
induction principle, where the pan the several fucntions are activated. During
bottom is heated directly. This works as the operating, a matching light is shown,
follows: accompagnied by a “beep“ sound. You can
A generator under the glass plate easily adjust the power, by sliding your
produces an induction zone. If a pan finger in between the positions 0 to 9, or
with a magnetic bottom is placed on the simply by pressing the required position
zone, it will heat the pan bottom. direclty
For this type of cooking, specific pans
with a thick, magnetic bottom are Each induction zone has its individual
required. The induction zone cooling ventilator, which will start blowing
automatically adapts itself to the pan at low speed if the zone heats up. It will
bottom diameter. However, when the increase its speed when the zone gets
pan is too small or not suitable for warmer. If the temperature allows it, it will
induction, it will not heat the pan. This automatically switch off again. Even after
will be indicated in the display by a the appliance itself is switched off, the
symbol [ U ] ventilator may keep blowing temporarily.
This is necessary to cool and protect the
electronic components inside.
Chapter 3
EN 11 Use
p
0 9
3.3 Symbolism control panel
On | off
0-9 Power adjuster [slider]
U Pan detector[no suitable or too small pan]
A Automatic cooking
E Error | electronic failure
H Rest warmth indicator
P Power booster
L Lock
Warming function [70°C]
|| Pause position
Touch control display
[varies per model]
To Next Page
Loading...