EN 14 Use
3.4.9 Pause 3.4.12 Lock
With this function, all current cooking The prevent unwanted switching on of the
settings are temporarily interrupted. Press zones, for example while cleaning, the
the pause symbol for app. 2 seconds. To control panel can be locked, with
continue, press again for app. 2 seconds exception of the on/off switch. Follow
[led blinks] and press a random symbol. these steps:
1. Press the on/off switch.
3.4.10 Memory function 2. Simultaneously press the ”P“ and the
After switching off the appliance, it is ”0” of the right display.
possible to recall the last settings like: 3. Press the “0“ again of the right display.
- Power settings of the individual zones Now the symbol ”L“ appears in the display.
- Cooking time settings of individual zones To unlock again:
- Automatic cooking settings 1. Press the on/off switch.
Follow these steps: 2. Simultaneously press the “P“ and ”L“ of
1. Press the on/off symbol. the right display, within 5 seconds. The
2. Press the pause symbol within 6 symbol ”0” or ”H“ appears in the display.
seconds. Now the previous settings are Press the ”P“ again and all displays are
activated. switched off.
3.4.11 Warming function
By using this function, dishes are
automatically kept warm at a temperature
of 70°C. This prevents boiling over and
burning. You can use this function for
maximal 2 hours. If the pan is removed,
the warming function remains working for
an extra 10 minutes, unless the appliance
is switched off.
1. Select the zone for the warming
function.
2. Press the warming symbol, on the left
side of the power slider indicator. To
switch off the function, press the display
of the zone, and select the requested
power position between “0“ and “9“.
EN 15 Maintenance
3.5 Pans 4.1 Maintenance
If the pan diameter is too large, this will Clean the appliance after each use and rub
easier cause damages to your worktop. it dry again. Make sure that the
The manufacturer cannot be held liable for components are cooled down sufficiently
such damages. before starting.
3.5.1 Pan bottom Never use a steam cleaner. The steam can
Induction cooking requires specific pans get in contact with parts that are under
which have an induction suitable electric tension and can cause short-
magnetic pan bottom. circuit.
3.5.2 Pan diameter Do not use pointy or sharp objects to clean
Always use a pan that fits with the the silicone, control panel or the cooking
induction zone. Use the following ground zones.
rule:
large diameter on a power zone Never use these products to avoid
small diameter on a standard zone degradation of the cooking appliance
See indicative table below. surface: sand, soda/alkali, acid or chloride
containing cleaners, grill or oven sprays,
3.5.3 Energy-consious cleaners for dishwashers, stain or rest
Cook energy-consious, preferably with a removers, abrasives or sponges/brushes
pan lid which saves a lot of energy with a grating surface.
because it prevents that less warmth can
escape from the pan. Remove sweet products like marmelade,
sugar containing dishes or liquids
immediately from the appliance to avoid
degradation of the surface.
After the cleaning you must rub the i-
Cooking appliance dry with a clean cloth,
to avoid calcification.
induction zone pan Ø [cm]
min. max.
power zone 15 26
standard zone 12 24
Chapter 4
To Next Page
Loading...
