6
Preparing your juicer
Before using your juicer
Check the juicer after unpacking for any visual damage or missing parts such
as:
• Misaligned or damaged casing.
• Damage to the plug or cable.
• If any parts are missing or there is any damage, please refer to page 17
for Customer Services.
Clean your juicer
Before using the juicer you should clean the removable parts in warm soapy
water with a soft cloth or sponge. Be careful when cleaning the juicing blade,
dip in soapy water and clean using the cleaning brush provided. At no point
should you touch the blade as this could be harmful.
Do not immerse the base unit in any liquid.
If the unit is unplugged, you can clean the body with a damp soft cloth and
mild detergent.
Allow all parts to thoroughly dry before using.
Choose a suitable place for use
Place the juicer on a flat, stable surface with a plug socket close by.
Do not place in close proximity to any source of heat.
If you apply a small amount of downwards pressure, the feet on the base
should secure to the surface. This helps to prevent the unit from moving
around during use.
Once you have cleaned your juicer and prepared a suitable place for use, you
are now ready to begin preparing your food.
To Next Page
Loading...