9
Using your juicer
Now that you understand how to put together your juicer and your
fruit/vegetables are prepared, you are ready for use.
Remove the food pusher from the feeding chute if
it is placed in there. Plug the juicer into a suitable
outlet and make sure it switched on.
Ensure that both locking arms are in the lock
position or the unit will not work.
Turn the power control dial to the required speed
setting. Speed ‘2’ will allow the unit to operate
faster than speed ‘1’, and the pulse, ‘P’ setting,
can be used for momentary power to the juicer.
Speed ‘1’ is especially useful for soft fruit and
vegetables, such as watermelons, grapes,
raspberries, cucumbers and tomatoes.
Speed ‘2’ is suitable for all kinds of fruit and
vegetables.
Note: The maximum time of one operating period is 2 minutes on full
power. If you operate for longer than this in one sitting, this could damage
the unit and create a potential hazard. Turn off and allow the unit to cool for
at least 2 minutes before continuing use.
To Next Page
Loading...