EN
14
Error Message Codes
Error
Code
Fault Description Solution
E01 Communication
Issue
Change remote control batteries and then restart. If it
does not restart please contact our Customer Service
Centre.
E02 Power Issue Turn the power off, unplug and leave for one hour
then restart. If it does not restart please contact our
Customer Service Centre.
E03 Overvoltage
protection
Please contact our Customer Service Centre.
E05 Overload
Protection
Turn the power off, unplug and leave for one hour
then restart. If it does not restart please contact our
Customer Service Centre.
E07 Safety Key Issue Please insert safety key into the safety key insert in the
correct position. If it does not restart please contact
our Customer Service Centre.
Abnormal Display
Screen
Turn the power off and turn back on after 1 minute.
If it does not display correctly please contact our
Customer Service Centre.
To Next Page
Loading...