To Next PageTo Next Page
Need help?Do you have a question about the Abt ABT-100 and is the answer not in the manual?
Details common installation issues like obstructions, unstable bases, and environmental light interference.
Specifies the horizontal and vertical adjustment ranges for optimal beam alignment.
Step-by-step guide for drilling, removing covers, and fastening the unit's base bracket.
Instructions for fixing the main body to the wall and connecting cables to the wire terminal.
Guidance on observing the collimation effect from a specific distance using the viewfinder.
Procedure for adjusting vertical and horizontal angles for optimal beam alignment using indicators.
Using a multimeter to measure voltage at test holes for precise horizontal and vertical alignment.
Diagram and explanation for adjusting the receiver's response time based on intruder speed.
Details the required physical test after setting, including transmitter and receiver indicator signals.
A table listing common faults, their causes, and recommended solutions for operational issues.
Comprehensive table detailing models, alert distances, detection modes, power, and dimensions.
Visual guide for recommended installation and illustrations of various available mounting brackets.
Information regarding the product's 3C and CE approvals, with UL approval pending.
General| Brand | Abt |
|---|---|
| Model | ABT-100 |
| Category | Security Sensors |
| Language | English |
