– 16 –
Explanation of symbols
The following symbols are used in this manual:
Warning
•Thisgasalarmdetectsmethane(naturalgas).Othergases,steam,heat,
smokeandglowofre/ameswerenotdetected!Detectorswithspecial
sensorsarerequiredforthis!
•Thedangerwithgasesisthattheymixinwiththeairandare,asa
result,highlyammableandthesmallestofsparkscouldcausean
explosion!
•Inthedailyhandlingofthegasalarm,itmustbeborneinmindthatit
can not prevent an explosion, but only assumes a signaling in the event
of a gas leakage. Please replace the gas alarm at least every 5 years in
accordance with your own safety (see recommended replacement date
on the front of the device).
•ThisalarmisequippedwithapowerplugforvoltageofAC220-240V,
50Hz/60Hz. Please note that the gas alarm does not work in case of a
Symbol Signal word Meaning
Warning Indicates risk of injury or health hazards.
Warning
Indicates risk of injury or health hazards caused by
electrical voltage.
Important Indicates possible damage to the device/accessories.
Note Indicates important information.
Safety information