43
Fitting the lock body
1. Set and mark the position of the lock body on the door panel (Fig. 3+4).
hole saw from both sides.
Before fitting the lock body, remove the cover hood corresponding to Fig. 10.
Fig. 9
½ ½
5155 mm
Fig. 10
Fig. 13
Fig. 12
Fig. 11
3. Mount the lock body, attach the escutcheon at door exterior (Fig. 11).
4. Position lock body corresponding to Fig. 12.
Note:
Caution! Do not overwind.
GB
To Next Page
Loading...
