EasyManua.ls Logo

Abus RWM120 - Cleaning instructions; Maintenance and replacement

Abus RWM120
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 32 –
The results and measures taken should be documented accordingly.
Dust covered alarms must be cleaned. Dust deposits in the alarm’s air
vents can be sucked up or blown out.
Dust can be removed with a brush if required.
The surface area can be cleaned with a slightly damp and soapy cloth.
Take care that no liquids get into the apparatus! Do not clean device in
a dishwasher!
Do not use any sharp, pointed, abrasive or caustic cleaning products,
chemicals or hard brushes!
Maintenance
The electronic components of each smoke alarm are subject to ageing.
In addition, smoke measure chambers will inevitably become contami-
nated over time.
To guarantee full functionality for your smoke alarm, it should be
replaced no more than 10 years from the date that it is rst used!
Warranty
ABUS products are designed and manufactured with great care and
tested in accordance with applicable regulations.
The warranty extends solely to defects that can be attributed to faulty
materials or manufacturing at the time of purchase. If it can be proved
that materials or manufacturing are faulty, the warranty provider agrees
to repair or replace the smoke alarm at their own discretion.
In such cases the warranty will end upon expiry of the original warranty
period of 2 years. Any further claims are expressly excluded.
Care and maintenance | Warranty

Table of Contents

Related product manuals