19
Network Settings
DHCP Client:
DHCP client mode could be enabled/disabled statues. If DHCP is enabled, there
should be a DHCP server in the network. If DHCP is disabled, [IP address], [Subnet
mask], and [Default Gateway] should be assigned manually.
Static IP Address:
The IP address of the interface converter, 4 digits separated by '.' don’t let it conflict
with the other devices in the network.
If DHCP client mode is enabled and there's a DHCP server on the network, this field
will be assigned by DHCP server automatically.
Static Subnet Mask:
Subnet mask of the network, the converter device is connected to. “255.255.255.0” is
usually used for small network, “255.255.0.0” for larger network. If your IP address is
provided by an ISP or the internal network administrator, please enquire that
information and type it in correctly.
If DHCP client mode is enabled and there's a DHCP server in the network, this field
will be assigned by DHCP server automatically.
Static Default Gateway:
Gateway or Router IP address. 'Gateway' is a device which connects local network to
external network. If you need to communicate with other networks or your device
owns a real IP address on the internet, please enquire that information and type it
correctly. If there's no gateway on the network, just leave it as “0.0.0.0”.
If DHCP client mode is enabled and there's a DHCP server on the network, this field
will be assigned by DHCP server automatically.
Static DNS Server:
IP address of DNS server to translates memorized domain names to the numerical IP
addresses.
Connection Type: TCP or UDP
Transmit timer:
Server/Client Mode:
TCP Server: TCP protocol, passive open, to be connected from the TCP clients.
TCP Client: TCP protocol, active open, connect to the TCP server.
UDP Mode: UDP protocol, connectionless
Server Listening Port:
The server listening port is connected in TCP Client and UDP Client mode for a
certain serial port.
Client Destination Host Name/IP:
The IP address or host name of the client.
Client Destination Port:
The client destination port is connected in TCP Server and UDP Server mode for a
certain serial port.