24
Troubleshooting
Under 64bit Windows operation system:
To run the interface convertor with Virtual Serial Port you have to run “AXR2E
Configuration Utility” by right click run as administrator to get system permission, if
it still not wok please follow the installation step below:
Under C:\Program Files (x86)\AX110xx RS232-to-Ethernet Configuration Utility\
you will find “NETVSPD.inf & NETVSPD.sys”
• Copy NETVSPD.inf to C:\Windows\inf\
• Copy NETVSPD.sys to C:\Windows\System32\drivers\
To Next Page
Loading...
